Baseco solid wood floors should be stored in their sealed packaging until they are to be installed. Use a moisture seal if even the slightest risk of moisture under the flooring exists and always when installing onto concrete. Make sure the underlying surface is level and lay rag board or equivalent material on joist surfaces next to the wood floor. The end-seams may be placed between the joists when laying 25 mm flooring on joists c/c 600 mm.   It is recommended that if floor heating is also installed, the wood floor be installed using screws or nails. Avoid using the heating the first three weeks after the floor is installed. Baseco solid wood floors on floor heating may result in larger shrinkage slots than without floor heating. Baseco solid wood floors may be heated to a maximum of 28° C. Installation instructions for printing, (PDF format) »